Item # 158 / 158-SS Steel Cam Type Lock
A popular Cam Type Lock with narrow keepers which allow minimum extension from body. Modern all steel fabricated handle and hasp allow the body builder to simply weld handle lug to pipe, eliminating cutting of pipe. This competitively priced lock features keepers and lugs of ductile iron. All remaining parts fabricated of high quality steel. Supplied without padlock.
Can also be supplied in 304 stainless steel for excellent corrosion resistance.
Supplied less 3/4″ pipe (schedule 40).
 
Weight (without pipe)-6 1/4 lbs.

Also available in Stainless Steel.

158

158View

Item # 257, 257-Steel Cam Action Side Door Lock
Item # 257-SS, 257-Stainless Steel Cam Action Side Door Lock
Item # 157, 157-Steel Cam Action Side Door Lock
Item # 157-SS, 157-Stainless Steel Cam Action Side Door Lock
All steel lock allows entire length of pipe to cam over to secure doors. Handle has black vinyl grip and is riveted, not bolted to handle lug for added security.
Bushing assembly supplied with non-removable pin for maximum security.
Note: Supplied less padlock.
Supplied less 3/4″ pipe (schedule 40).
257 Supplied with 3/8″ thick handle.
157 Supplied with 1/4″ thick handle.

257

Item #258-001, Heavy Duty Cam Action Door Lock with 1-15/16″ Wide Universal Keeper
Same as No. 258-002 except Universal keeper is 1-15/16″ wide.

Item #258-002, Heavy Duty Cam Action Door Lock 1-1/4″ Narrow Wide KeeperFor Flush to 3/4″ offset doors. Uses standard 3/4″ Pipe. 
Handle has permanently affixed vinyl grip and is riveted, not bolted, to lug for maximum security. Features narrow 1-1/4″ wide keepers for side or rear door application. Maximum extension from body 1-3/4″. All mounting holes for 3/8″ bolts.
 
Lugs and keepers are made from steel. The handle, hasp & pipe retainers are manufactured from steel.
 
Universal for right or left hand doors.
 
Note: Supplied less padlock.

Finish: 
Lugs & keepers are hot dip galvanized.
 
Hasp, pipe retainers & handle assembly are zinc plated.
Supplied without 3/4″ pipe.
Weight (without pipe) – 10 lbs.

Item # 258-002 SS, Heavy Duty Cam Action Door Lock 1-1/4″ Narrow Wide Keeper
Same as 258-002 except supplied as stainless steel.

Item # 258-003, Heavy Duty Cam Action Door Lock with Adjustable Handle to Adjust Lock Tighter
Same as 258-001 except with adjustable handle to adjust lock tighter as seal wears.
Item # 258-004, Heavy Duty Cam Action Door Lock with Adjustable Handle
Same as 258-002 except with adjustable handle.
Item # 258-004, Heavy Duty Cam Action Door Lock with Adjustable Handle
Same as 258-004 except supplied as Stainless Steel.

Note: Can be supplied as a weldment.

258-001
258-001

258-001View

258-002
258-002
258-002-SS

Item # 358-001, 3 Point Cam Action Door Lock with 1-15/16″ Wide Universal Keeper
All steel construction with cast steel lugs, keepers and pipe retainers.
For flush to 3/4″ offset doors. Uses standard 3/4″ pipe.
Features narrow 1-1/4″ wide keepers for side or rear door application or 1-15/16″ wide universal keepers.
Offset pipe retainers allow for mounting near edge of door. Pipe retainers have nylon bearings for smooth operation.
Hasp, handle assembly & center keeper manufactured from steel. Pipe retainers, keepers & lugs are ductile iron. Handle has black vinyl grip and is riveted, not bolted to handle lug for maximum security.
Supplied less padlock.
Finish: Zinc plated.
Supplied less pipe. Universal for right or left hand use.
Weight – 9 lbs.

Item #358-002, 3 Point Cam Action Door Lock 1-1/4″ Narrow Wide Keeper
All steel construction with cast steel lugs, keepers and pipe retainers. 
For flush to 3/4″ offset doors. Uses standard 3/4″ pipe.
Features narrow 1-1/4″ wide keepers for side or rear door application or 1-15/16″ wide universal keepers.
 
Offset pipe retainers allow for mounting near edge of door. Pipe retainers have nylon bearings for smooth operation.
Hasp, handle assembly & center keeper manufactured from steel. Pipe retainers, keepers & lugs are ductile iron. Handle has black vinyl grip and is riveted, not bolted to handle lug for maximum security.
Supplied less padlock.
 
Finish: Zinc plated.
 
Supplied less pipe. Universal for right or left hand use.
 
Weight – 9 lbs.

358-001
No. 358-001
3-Point Cam lock with universal keepers
No. 358-002
3 Point Cam lock with narrow keepers

358-001View

Item # 358-012, 3 Point Cam Action Door Lock with Cast Lugs & Pipe Retainer
All steel construction with cast steel lugs and pipe retainers.
Offset pipe retainers allow for mounting on edge of door. Pipe retainers have nylon bearings for smooth operation. Can be order as two or thee point locks.
Handle has black vinyl grip and is riveted, not bolted for maximum security. Uses standard 3/4″ pipe (schedule 40). Universal mounting right or left. Supplied less padlock.
Finish – Zinc plated.
 
Supplied less pipe.
Weight – 9 lbs.

358-012

358-012View

Item # 458-008 / 458-008-SS, Two Point Anti-Rack Lock
Item # 458-007 / 458-007-SS, Three Point Anti-Rack Lock
Item # 458-018 / 458-018-SS, Two Point Anti-Rack Lock Stamped Lugs
Item # 458-017 / 458-017-SS, Three Point Anti-Rack Lock Stamped Lugs
All steel zinc plated or stainless steel lock with black vinyl grip on handle. Handle riveted permanently for extra security. Mounting holes for 3/8″ bolt universal for right or left hand-supplied less 3/4″ pipe and padlock. 
Lock can be special ordered as a weldment.
 
Weight: 4.5 lbs.

458-008

Item # 0558-001, Anti-Rack Lock Kit Left Hand
This lock can be supplied as a complete weldment using 1″ schedule 40 pipe or it can be supplied as a kit of parts less pipe for welding in the field. Normally supplied with a hot dip galvanized finish. Cams and keepers are of forged steel, supplied with two anti-rack rings, two large bearing brackets with nylon bearings and one center bracket with nylon bearings.
If a weldment including pipe is desired, with exact specifications for size and location of parts.

558-002

Item # 0558-002, Anti-Rack Lock Kit Right Hand
This lock can be supplied as a complete weldment using 1″ schedule 40 pipe or it can be supplied as a kit of parts less pipe for welding in the field. Normally supplied with a hot dip galvanized finish. Cams and keepers are of forged steel, supplied with two anti-rack rings, two large bearing brackets with nylon bearings and one center bracket with nylon bearings.
If a weldment including pipe is desired, with exact specifications for size and location of parts.

0658-001

Item # 0658-001, Anti-Rack Lock Kit
This lock can be supplied as a complete weldment using 1″ schedule 40 pipe or it can be supplied as a kit of parts for welding in the field. Supplied with two large brackets with nylon bearing, one center bracket with nylon bearings, two keepers, two cams, one handle, and one hasp. The top and bottom cams may be reversed so that the lock is either right or left hand.
Finish – Stainless Steel – Polished, Steel – Galvanized.
Weight – 5 lbs.

0658-SSP

Item # 0658-SSP, Anti-Rack Lock Kit
This lock can be supplied as a complete weldment using 1″ schedule 40 pipe or it can be supplied as a kit of parts for welding in the field. Supplied with two large brackets with nylon bearing, one center bracket with nylon bearings, two keepers, two cams, one handle, and one hasp. The top and bottom cams may be reversed so that the lock is either right or left hand.
Finish – Stainless Steel – Polished, Steel – Galvanized.
Weight – 5 lbs.

1057-AS

Item # 1057-AS, Aluminum Lock Less Pipe
Lock allows entire length of the pipe to cam over to secure door. Supplied with hinge type pipe holders. Handle has black vinyl grip and is riveted, not bolted to lug for added security.
Bracket assemblies supplied with non removable pin for maximum security. Also available with removable pin on hinge type pipe holder.
Normally supplied less pipe but, can be purchased pre-welded in 36″ and 48″ lengths, ex. 1057-36-A, 1057-48-A.
Finish -Mill finish Aluminum
Lock can be special ordered as a weldment in various lengths.

6011-001

Item # 6011-001, Two Point Deadbolt Rod Lock
All steel construction. For use on wood or metal doors. Furnished with two 36″, 3/8″ Dia. rods. 48″ rods also available. Reversible for left or right hand doors. Spring holds rods in open or closed position. Furnished with anti-rattle rod guides.
Finish – Zinc plated.
Weight – 3 3/4 lbs.
Item # 6011-001-S, Two Point Deadbolt Lock with Safety Release
Same as above but with safety release and inside handle.
Finish – Zinc plated
Weight – 4 1/4 lbs.

6011-001-S

6011-001-SView

Item # 6013-001, Three Point Dead Bolt Rod Lock
All steel construction. For use on wood or metal doors. Furnished with two 36″, 3/8″ Dia. rods. 48″ rods also available. Reversible for left or right hand doors. Spring holds rods in open or closed position. Furnished with anti-rattle rod guides.
With 3rd locking point on center latching mechanism.
Finish – Zinc plated
Weight – 4 lbs.
Item # 6013-001-S, Three Point Deadbolt Lock with Safety Release
Same as above but with safety release and inside handle.
Finish – Zinc plated
Weight – 4 1/2 lbs.

6011-002

6011-002View

Item # 6011-002, Two Point Deadbolt Rod Lock with 2 Flush Endbolts
Item # 6011-003, Two Point Deadbolt Rod Lock with 1 Flush & 1 Offset Endbolt
Item # 6011-004, Two Point Deadbolt Rod Lock with 2 Offset Endbolts
All steel construction. For use on wood or metal doors. Furnished with two 36″, 3/8″ Dia. Rods. 48″ rods also available. Reversible for left or right hand doors. With 60 Deg. endbolt assemblies.

Finish – Zinc plated.
Weight – 5 lbs.

Item # 6011-002-S, Two Point Deadbolt Rod Lock with 2 Flush Endbolts
Item # 6011-003-S, Two Point Deadbolt Rod Lock with 1 Flush & 1 Offset Endbolt
Item # 6011-004-S, Two Point Deadbolt Rod Lock with 2 Offset Endbolts
Same as above but with safety release and inside handle.
Finish – Zinc plated.
Weight – 5-1/2 lbs.

6011-003

6011-003View

Item # 6013-002, Two Point Deadbolt Rod Lock with 2 Flush Endbolts
Item # 6013-003, Two Point Deadbolt Rod Lock with 1 Flush & 1 Offset Endbolt
Item # 6013-004, Two Point Deadbolt Rod Lock with 2 Offset Endbolts
Same as two point shown above but with 3rd locking point on center latching mechanism.
Finish – Zinc plated.
Weight – 5-1/2 lbs.
Item # 6013-002-S, Two Point Deadbolt Rod Lock with 2 Flush Endbolts
Item # 6013-003-S, Two Point Deadbolt Rod Lock with 1 Flush & 1 Offset Endbolt
Item # 6013-004-S, Two Point Deadbolt Rod Lock with 2 Offset Endbolts
Same as above but with safety release and inside handle.
Finish – Zinc plated.
Weight – 6 lbs.

6013-003

6013-003View

Item # 6011-005, Two Point Slam Rod Lock With 2 Flush Endbolts
Item # 6011-006, Two Point Slam Rod Lock With 1 Flush & 1 Offset Endbolt

Item # 6011-007, Two Point Slam Rod Lock With 2 Offset Endbolts
All steel construction. For use on wood or metal doors. Can be closed without opening outside handle. Furnished with two 36″, 3/8″ Dia. rods. 48″ rods also available. Reversible for left or right hand doors. With 60 Deg. endbolt assemblies.
Finish – Zinc plated.
Weight – 5 lbs.

Item # 6011-005, Two Point Slam Rod Lock with Safety Release With 2 Flush Endbolts
Item # 6011-006, Two Point Slam Rod Lock with Safety Release With 1 Flush & 1 Offset Endbolt
Item # 6011-007, Two Point Slam Rod Lock with Safety Release With 2 Offset Endbolts

Same as above but with safety release and inside handle.
Finish – Zinc plated.
Weight – 5-1/2 lbs.

Item # 6011-008, Two Point Slam Lock with Double Taper Bolts With 2 Flush Endbolts
Item # 6011-009, Two Point Slam Lock with Double Taper Bolts With 1 Flush & 1 Offset Endbolt
Item # 6011-010, Two Point Slam Lock with Double Taper Bolts With 2 Offset Endbolts

Same as lock shown above but with double taper endbolts to provide tension when closed.
Finish – Zinc plated.
Weight – 5 lbs.

Item # 6011-008, Two Point Slam Lock with Double Taper Bolts & Safety Release With 2 Flush Endbolts
Item # 6011-009, Two Point Slam Lock with Double Taper Bolts & Safety Release With 1 Flush & 1 Offset Endbolt
Item # 6011-010, Two Point Slam Lock with Double Taper Bolts & Safety Release With 2 Offset Endbolts

Same as above but with safety release and inside handle.
Finish – Zinc plated.
Weight – 5-1/2lbs.

6011-010

6011-010View

6011-06

6011-06View
6011-09

Item # 7011, Heavy Duty 3 Point Dead Bolt Lock
For rear and side doors. Inside handle available if desired.
Material – Steel with steel bolts, the 7011 features a tapered center bolt for a positive cam latch at center position. Reversible, may be used on right or left hand doors.
Supplied with center case, top and bottom end bolts one 36″ steel rod & one 48″ steel rod. Rod 1/4″ x 3/4″.
Finish – Zinc Plated.
Item # 7011-B, Outside Padlocking Handle for use with 7011 Lock

7011

7011View
7011

Item #7011-S, Heavy Duty 3 Point Dead Bold Lock with Inside Safety Release
For rear and side doors.
Material: Steel with steel bolts, the 7011 features a tapered center bolt for a positive cam latch at center position. Reversible, may be used on right or left hand doors
Supplied with: Center case, top & bottom end bolts and housings.
 
One 36″ steel rod and one 48″ steel rod with steel inside handle.
Finish – Zinc plated.
Weight – 17 lbs
For outside handle use 7011-B or 7011-L with 5/8″ shank.

Item #7011-S, Centercase Only
For use when a single point dead bolt lock is desired with inside safety release.
Steel case with steel bolt. Bolt is tapered for positive cam latching. Supplied with inside handle. Universal for right and left hand doors.
For outside handle use 7011-B or 7011-L with 5/8″ shank.
Finish – Zinc plated.
Weight – 3 lbs

7011-SC

7011-SCView
7011-S

Item # 7011-006, Heavy Duty 3 Point Dead Bolt Lock
|
Zinc plated dead bolt lock with round rods and rod guides
Item # 7011-006-S, Safety Lock
Zinc plated safety lock with round rods and rod guides
Material – All steel construction, the 7011 features a tapered center boll for a positive cam latch at center position. Reversible, may be used on right or left hand doors. For outside handle use 7011-B or 7011-L with 5/8″ square shank.
Supplied with a center case, 1 – 36″ and 1 – 48″ 1/2″ zinc plated steel rod and two rod guides.
Finish – Zinc Plated
Weight – 17 lbs.

7011-006S

7011-006SView

Item # 3057, Steel Lock Less Pipe
Item # 3057-36, Steel Weldment Lock – 36″
Item # 3057-45, Steel Weldment Lock – 45″
Item # 3057-48, Steel Weldment Lock – 48″
Item # 3057-55, Steel Weldment Lock – 55″
Item # 3057-SS, Stainless Steel Lock Less Pipe
All lock allows entire length of the pipe to cam over to secure door. Supplied with hinge type pipe holders. Handle has black vinyl grip and is riveted, not bolted to lug for added security.
Bracket assemblies supplied with non removable pin for maximum security. Also available with removable pin on hinge type pipe holder.
Normally supplied less pipe but, can be purchased pre-welded in 36″ and 48″ lengths, ex. 1057-36, 1057-48.
Finish – Zinc plated steel-Stainless Steel-Aluminum.
Lock can be special ordered as a weldment in various lengths.

3057

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 



Browse our inventory of industrial hardware

Hardware MFG

1415 S. 18th

Saint Louis, MO 63104

Email: HardwareMFG@aol.com

Phone: (314) 436-0432

Fax: (314) 436-0481

Conversion Optimized Website Design by Engios Digital

Copyright 2018 HardwareMFG. All rights reserved