(314) 436-0432

HardwareMFG@aol.com

Tired of fabrications on products you never seem to have on hand?

Custom short run stampings from inexpensive tools from a USA source: simple parts like brackets are often just a dollar or two and hard tooling can be as little as $500 with our tool design.

This is not progressive tooling costing tens of thousands of dollars but a simple punch and die set that we keep in running condition.

 

If your parts look like these, we may be a contract stamper you should consider.

Tool Making 

Recently (2017), we quoted 2,000 pcs 3/16 ths thick and 2” x  3 9/16”  flat plates zinc plated with holes for 85¢ each with $585 tooling fee a laser operator had quoted the same part and quantity for $1.55 each.  On the first order, there was a saving in spite of tooling costs.

Parts can be as thin as .010 or as thick as .187 mild steel; or .120 stainless.

A sample run is recommended if you have time to prove your design and is optional.

Production

  • 20 to 440-ton presses
  • Tools registered, cataloged and stored on premises
  • Tooling/presses/routing optimized for efficiency
  • Machining
  • Deburring
  • Tapping
  • Reaming
  • Counterboring
  • Spotfacing
  • Welding
  • Assembly
  • Outsourcing

JIT service

 

Division Stampings, Inc

Equipment List

50,000 sq ft Short Run Facility • 50 Presses (42 with Deep Draw Cushions)

1   LVD Orion 3015 4000kw Laser, 5 x 10’ Bed with load/unload automation

1   LVD 50/20 PPS 55-ton press brake

1   Bliss 400 ton straight side press                                          

1   C250 Bliss 250 ton press, with drawing cushion                  

1   C150 Bliss 150 ton press, with drawing cushion                  

1    C150 Bliss 150 ton gap frame press                                    

6   C60 Bliss 60 ton press, five with drawing cushion               

5   C45 Bliss 45 ton press, four with drawing cushion              

5   C35 Bliss 35 ton press, with drawing cushion                      

10  C22 Bliss 22 ton press, with drawing cushion                     

1   ½” x 10’ capacity Cincinnati metal shear                            

1   5500# Caterpillar lift truck                                                 

2   3000# Electric lift truck                                                    

1   4 cu ft Vibratory finishing machine                                  

1   14 cu ft Vibratory finishing machine                                  

1   Scherr Tumico optical comparator                                     

3   Automatic tapping machines, a capacity to 1-1/4”                

3   Floor mount electronic counting scale                                 

1   6 x 10” Harig Automatic surface grinder                            

1   16 x 24” NICO automatic surface grinder                          

3   Bridgeport VMC machining centers                                   

2    Metal Lathe                                                                        

1   Timesaver 9” belt sander (wet)                                           

Complete inspection dept for checking parts and tooling 

Large rack system for raw material inventory      

1   Bliss 300 ton straight side press

3   C200 Bliss 200 ton press, with drawing cushion

4   C110 Bliss 100 ton press, with drawing cushion

3   C75 Bliss 75 ton press, with drawing cushion

1   #21-1/2 Bliss 65-ton press, with drawing cushion

3   #21 Bliss 45-ton press, with drawing cushion

3   Bliss 35 ton back-geared press, with cushion

1   Bliss 20 ton back-geared press, with cushion

1   ¼” x 10’ capacity Cincinnati metal shear

1   3500# Caterpillar lift truck

1   1 cu ft Vibratory finishing machine

3   7 cu ft Vibratory finishing machine

2   Hardness tester, most scales

1   Mitutoyo Coordinate measuring machine

3   Secondary operation drill press

2   Tabletop electronic counting scale

1   8 x 15” Bridgeport manual surface grinder

1   Fanuc Alpha 1B wire EDM

1   Bridgeport VMC 3020 machining center

1   Haeger 618 hardware insertion press

1   300 ton Hydraulic press for die tryout

 

 

For more Information, Quotes or to Order, please contact:

Terry Barber  /  HardwareMFG.com

phone: (314) 436-0432 • fax: (314) 436-0481

email: hardwaremfg@aol.com

Get in touch with hardware mfg 

 

Hardware MFG
1415 S. 18th
Saint Louis, MO 63104
HardwareMFG@aol.com
Phone: (314) 436-0432
Fax: (314) 436-0481

 

Copyright 2018 Hardware MFG. All rights reserved

Website Design by BPN-web-services