Item #258-001, Heavy Duty Cam Action Door Lock with 1-15/16″ Wide Universal Keeper
Same as No. 258-008 except Universal keeper is 1-15/16″ wide.

Item #258-002, Heavy Duty Cam Action Door Lock 1-1/4″ Narrow Wide Keeper
For Flush to 3/4″ offset doors. Uses standard 3/4″ Pipe.
Handle has permanently affixed vinyl grip and is riveted, not bolted, to lug for maximum security. Features narrow 1-1/4″ wide keepers for side or rear door application. Maximum extension from body 1-3/4″. All mounting holes for 3/8″ bolts.
Lugs and keepers are made from steel. The handle, hasp & pipe retainers are manufactured from steel.
Universal for right or left hand doors.
Note: Supplied less padlock.

Finish:
Lugs & keepers are hot dip galvanized.
Hasp, pipe retainers & handle assembly are zinc plated.
Supplied without 3/4″ pipe.
Weight (without pipe) – 10 lbs.

Item # 258-002 SS, Heavy Duty Cam Action Door Lock 1-1/4″ Narrow Wide Keeper
Same as 258-002 except supplied as stainless steel.

Item # 258-003, Heavy Duty Cam Action Door Lock with Adjustable Handle to Adjust Lock Tighter
Same as 258-001 except with adjustable handle to adjust lock tighter as seal wears.
Item # 258-004, Heavy Duty Cam Action Door Lock with Adjustable Handle
Same as 258-002 except with adjustable handle.
Item # 258-004, Heavy Duty Cam Action Door Lock with Adjustable Handle
Same as 258-004 except supplied as Stainless Steel.

Note: Can be supplied as a weldment.

258-001
258-001

AllMountingHoles

258-002-SS
258-002
258-002-SS

Item # 358-001, 3 Point Cam Action Door Lock with 1-15/16″ Wide Universal Keeper
All steel construction with cast steel lugs, keepers and pipe retainers.
For flush to 3/4″ offset doors. Uses standard 3/4″ pipe.
Features narrow 1-1/4″ wide keepers for side or rear door application or 1-15/16″ wide universal keepers.
Offset pipe retainers allow for mounting near edge of door. Pipe retainers have nylon bearings for smooth operation.
Hasp, handle assembly & center keeper manufactured from steel. Pipe retainers, keepers & lugs are ductile iron. Handle has black vinyl grip and is riveted, not bolted to handle lug for maximum security.
Supplied less padlock.
Finish: Zinc plated.
Supplied less pipe. Universal for right or left hand use.
Weight – 9 lbs.

Item # 358-002, 3 Point Cam Action Door Lock 1-1/4″ Narrow Wide Keeper
All steel construction with cast steel lugs, keepers and pipe retainers.
For flush to 3/4″ offset doors. Uses standard 3/4″ pipe.
Features narrow 1-1/4″ wide keepers for side or rear door application or 1-15/16″ wide universal keepers.

Offset pipe retainers allow for mounting near edge of door. Pipe retainers have nylon bearings for smooth operation.
Hasp, handle assembly & center keeper manufactured from steel. Pipe retainers, keepers & lugs are ductile iron. Handle has black vinyl grip and is riveted, not bolted to handle lug for maximum security.
Supplied less padlock.

Finish: Zinc plated.

Supplied less pipe. Universal for right or left hand use.

Weight – 9 lbs.

358-001
No. 358-001
3-Point Cam lock with universal keepers
No. 358-002
3-Point Cam lock with narrow keepers

Offset

Item # 358-012, 3 Point Cam Action Door Lock with Cast Lugs & Pipe Retainer
All steel construction with cast steel lugs and pipe retainers.
Offset pipe retainers allow for mounting on edge of door. Pipe retainers have nylon bearings for smooth operation.
Can be order as two or thee point locks.
Handle has black vinyl grip and is riveted, not bolted for maximum security. Uses standard 3/4″ pipe (schedule 40).
Universal mounting right or left.
Supplied less padlock.
Finish – Zinc plated.
Supplied less pipe.
Weight – 9 lbs.

358-012

ViewBB

Item # 458-008 / 458-008-SS, Two Point Anti-Rack Lock
Item # 458-007 / 458-007-SS, Three Point Anti-Rack Lock
Item # 458-018 / 458-018-SS, Two Point Anti-Rack Lock Stamped Lugs
Item # 458-017 / 458-017-SS, Three Point Anti-Rack Lock Stamped Lugs
All steel zinc plated or stainless steel lock with black vinyl grip on handle. Handle riveted permanently for extra security. Mounting holes for 3/8″ bolt universal for right or left hand-supplied less 3/4″ pipe and padlock.
Lock can be special ordered as a weldment.

Weight: 4.5 lbs.

158-158-SS

Item # 158 / 158-SS Steel Cam Type Lock
A popular Cam Type Lock with narrow keepers which allow minimum extension from body. Modern all steel fabricated handle and hasp allow the body builder to simply weld handle lug to pipe, eliminating cutting of pipe. This competitively priced lock features keepers and lugs of ductile iron. All remaining parts fabricated of high quality steel. Supplied without padlock.
Can also be supplied in 304 stainless steel for excellent corrosion resistance.
Supplied less 3/4″ pipe (schedule 40).

Weight (without pipe)-6 1/4 lbs.

Also available in Stainless Steel.
SS

SS-ViewBB

Item # 257, 257-Steel Cam Action Side Door Lock
Item # 257-SS, 257-Stainless Steel Cam Action Side Door Lock
Item # 157, 157-Steel Cam Action Side Door Lock
Item # 157-SS, 157-Stainless Steel Cam Action Side Door Lock
All steel lock allows entire length of pipe to cam over to secure doors. Handle has black vinyl grip and is riveted, not bolted to handle lug for added security.
Bushing assembly supplied with non-removable pin for maximum security.
Note: Supplied less padlock.
Supplied less 3/4″ pipe (schedule 40).
257 Supplied with 3/8″ thick handle.
157 Supplied with 1/4″ thick handle.

257

Item # 3057, Steel Lock Less Pipe
Item # 3057-36, Steel Weldment Lock – 36″
Item # 3057-45, Steel Weldment Lock – 45″
Item # 3057-48, Steel Weldment Lock – 48″
Item # 3057-55, Steel Weldment Lock – 55″
Item # 3057-SS, Stainless Steel Lock Less Pipe
All lock allows entire length of the pipe to cam over to secure door. Supplied with hinge type pipe holders. Handle has black vinyl grip and is riveted, not bolted to lug for added security.
Bracket assemblies supplied with non removable pin for maximum security. Also available with removable pin on hinge type pipe holder.
Normally supplied less pipe but, can be purchased pre-welded in 36″ and 48″ lengths, ex. 1057-36, 1057-48.
Finish – Zinc plated steel-Stainless Steel-Aluminum.
Lock can be special ordered as a weldment in various lengths.

7011

Item # 7011, Heavy Duty 3 Point Dead Bolt Lock
For rear and side doors. Inside handle available if desired.
Material – Steel with steel bolts, the 7011 features a tapered center bolt for a positive cam latch at center position.
Reversible, may be used on right or left hand doors.
Supplied with center case, top and bottom end bolts one 36″ steel rod & one 48″ steel rod. Rod 1/4″ x 3/4″.
Finish – Zinc Plated.

Item # 7011-B, Outside Padlocking Handle for use with 7011 Lock
Steel handle with 5/8″ shank.
Weight: 3.0 lbs
Note: Padlock not included
Finish – Casting is zinc plated and powder coated. Mounting plate and shank are zinc plated
Item # 7011-B-SS, Stainless Steel Padlocking Handle
Stainless Steel Padlocking handle with 5/8″ shank.
Note: Padlock not supplied
Weight: 3.0 lbs
Item # 7011-L, L-Keylocking Handle
Steel handle with 5/8″ steel shank has push button locking cylinder. Available keyed-alike or keyed miscellaneous.
Finish – Casting is zinc plated and powder coated. Mounting plate is zinc plated.
Weight: 3.0 lbs.
Item # 7011-LN, LN-Keylocking Handle
Steel, 5/8″ steel shank, narrow mounting plate, push button locking cylinder; available keyed alike or miscellaneous.
Weight: 3.0 lbs
Finish – Casting is zinc plated and powder coated.
Item # 7011-LN-SS, Stainless Steel Keylocking Handle
Stainless Steel Keylocking handle, stainless steel, 5/8″ shank, narrow mounting plate, push button cylinder available keyed alike or miscellaneous.
Weight: 3.0 lbs
Item # 7011-006, Heavy Duty 3 Point Dead Bolt Lock
Zinc plated dead bolt lock with round rods and rod guides

7011-006

7011-Full
7011

7011-Small
7011-B
7011-B-SS

7011-B7011-B
7011-B-SS

7011-L
7011-L
7011-L-SS

7011-LView
7011-L
7011-L-SS

7011-LN
7011-LN
7011-LN-SS

7011-LNView
7011-LN
7011-LN-SS

Item # 7011-S, Heavy Duty 3 Point Dead Bolt Lock with Inside Safety Release
For rear and side doors.
Material: Steel with steel bolts, the 7011 features a tapered center bolt for a positive cam latch at center position. Reversible, may be used on right or left hand doors
Supplied with: Center case, top & bottom end bolts and housings.

One 36″ steel rod and one 48″ steel rod with steel inside handle.
Finish – Zinc plated.
Weight – 17 lbs
For outside handle use 7011-B or 7011-L with 5/8″ shank.

Item# 7011-S, Centercase Only
For use when a single point dead bolt lock is desired with inside safety release.
Steel case with steel bolt. Bolt is tapered for positive cam latching. Supplied with inside handle. Universal for right and left hand doors.For outside handle use 7011-B or 7011-L with 5/8″ shank.
Finish – Zinc plated.
Weight – 3 lbs

Item # 7011-B, Outside Padlocking Handle
Steel handle with 5/8″ shank.
Weight: 3.0 lbs
Note: Padlock not included
Finish – Casting is zinc plated and powder coated. Mounting plate and shank are zinc plated
Item # 7011-B-SS, Stainless Steel Padlocking Handle
Stainless Steel Padlocking handle with 5/8″ shank.
Note: Padlock not supplied
Weight: 3.0 lbs
Item # 7011-L, L-Keylocking Handle
Steel handle with 5/8″ steel shank has push button locking cylinder. Available keyed-alike or keyed miscellaneous.
Finish – Casting is zinc plated and powder coated. Mounting plate is zinc plated.
Weight: 3.0 lbs.
Item # 7011-LN, LN-Keylocking Handle
Steel, 5/8″ steel shank, narrow mounting plate, push button locking cylinder; available keyed alike or miscellaneous.
Weight: 3.0 lbs
Finish – Casting is zinc plated and powder coated.
Item # 7011-LN-SS, Stainless Steel Keylocking Handle
Stainless Steel Keylocking handle, stainless steel, 5/8″ shank, narrow mounting plate, push button cylinder available keyed alike or miscellaneous.
Weight: 3.0 lbs
Item # 7011-IH, Steel Inside Handle
#8 ga. x 1″ wide x 12 1/2″.
Finish – Zinc plated.

7011-IH

7011-S
7011-S

7011-B-SS
7011-B
7011-B-SS7011-B-SSView
7011-B
7011-B-SS

7011-L-SS
7011-L
7011-L-SS

7011-L-SSView
7011-L
7011-L-SS

7011-LN-SS
7011-LN
7011-LN-SS

7011-LN-SSsmView
7011-LN
7011-LN-SS

7011-IHSmall
7011-IH

Item # 7011-006, Heavy Duty 3 Point Dead Bolt Lock
Zinc plated dead bolt lock with round rods and rod guides
Item # 7011-006-S, Safety Lock
Zinc plated safety lock with round rods and rod guides
Material – All steel construction, the 7011 features a tapered center boll for a positive cam latch at center position. Reversible, may be used on right or left hand doors. For outside handle use 7011-B or 7011-L with 5/8″ square shank.
Supplied with a center case, 1 – 36″ and 1 – 48″ 1/2″ zinc plated steel rod and two rod guides.
Finish – Zinc Plated
Weight – 17 lbs.

7011-006-S

7011-006-SView

Item # 6011-001, Two point Deadbolt Rod Lock
All steel construction. For use on wood or metal doors. Furnished with two 36″, 3/8″ Dia. rods. 48″ rods also available. Reversible for left or right hand doors. Spring holds rods in open or closed position. Furnished with anti-rattle rod guides.
Finish – Zinc plated.
Weight – 3 3/4 lbs.
Item # 6011-001-S, Two Point Deadbolt Lock with Safety Release
Same as above but with safety release and inside handle.
Finish – Zinc plated
Weight – 4 1/4 lbs

6011-001

6011-001View

Item # 6013-001, Three Point Dead Bolt Rod Lock
All steel construction. For use on wood or metal doors. Furnished with two 36″, 3/8″ Dia. rods. 48″ rods also available. Reversible for left or right hand doors. Spring holds rods in open or closed position. Furnished with anti-rattle rod guides.
With 3rd locking point on center latching mechanism.
Finish – Zinc plated
Weight – 4 lbs.
Item # 6013-001-S, Three Point Deadbolt Lock with Safety Release
Same as above but with safety release and inside handle.
Finish – Zinc plated
Weight – 4 1/2 lbs.

6013-001

6013-001View

Item # 6011-002, Two Point Deadbolt Rod Lock with 2 Flush Endbolts
Item # 6011-003, Two Point Deadbolt Rod Lock with 1 Flush & 1 Offset Endbolt
Item # 6011-004, Two Point Deadbolt Rod Lock with 2 Offset Endbolts
All steel construction. For use on wood or metal doors. Furnished with two 36″, 3/8″ Dia. Rods. 48″ rods also available. Reversible for left or right hand doors. With 60 Deg. endbolt assemblies.
Finish – Zinc plated.
Weight – 5 lbs.

Item # 6011-002-S, Two Point Deadbolt Rod Lock with 2 Flush Endbolts
Item # 6011-003-S, Two Point Deadbolt Rod Lock with 1 Flush & 1 Offset Endbolt
Item # 6011-004-S, Two Point Deadbolt Rod Lock with 2 Offset Endbolts
Same as above but with safety release and inside handle.
Finish – Zinc plated.
Weight – 5-1/2 lbs.

6011-002

6011-002View

Item # 6013-002, Two Point Deadbolt Rod Lock with 2 Flush Endbolts
Item # 6013-003, Two Point Deadbolt Rod Lock with 1 Flush & 1 Offset Endbolt
Item # 6013-004, Two Point Deadbolt Rod Lock with 2 Offset Endbolts
Same as two point shown above but with 3rd locking point on center latching mechanism.
Finish – Zinc plated.
Weight – 5-1/2 lbs.

Item # 6013-002-S, Two Point Deadbolt Rod Lock with 2 Flush Endbolts
Item # 6013-003-S, Two Point Deadbolt Rod Lock with 1 Flush & 1 Offset Endbolt
Item # 6013-004-S, Two Point Deadbolt Rod Lock with 2 Offset Endbolts
Same as above but with safety release and inside handle.
Finish – Zinc plated.
Weight – 6lbs

6013-002

6013-002View

Item # 6011-005, Two Point Slam Rod Lock With 2 Flush Endbolts
Item # 6011-006, Two Point Slam Rod Lock With 1 Flush & 1 Offset Endbolt
Item # 6011-007, Two Point Slam Rod Lock With 2 Offset Endbolts
All steel construction. For use on wood or metal doors. Can be closed without opening outside handle. Furnished with two 36″, 3/8″ Dia. rods. 48″ rods also available. Reversible for left or right hand doors. With 60 Deg. endbolt assemblies.
Finish – Zinc plated
Weight – 5 lbs.

Item # 6011-005, Two Point Slam Rod Lock with Safety Release With 2 Flush Endbolts
Item # 6011-006, Two Point Slam Rod Lock with Safety Release With 1 Flush & 1 Offset Endbolt
Item # 6011-007, Two Point Slam Rod Lock with Safety Release With 2 Offset Endbolts

Same as above but with safety release and inside handle.
Finish – Zinc plated.
Weight – 5-1/2 lbs.

Item # 6011-008, Two Point Slam Lock with Double Taper Bolts With 2 Flush Endbolts
Item # 6011-009, Two Point Slam Lock with Double Taper Bolts With 1 Flush & 1 Offset Endbolt

Item # 6011-010, Two Point Slam Lock with Double Taper Bolts With 2 Offset Endbolts
Same as above but with safety release and inside handle.
Finish – Zinc plated.
Weight – 5-1/2lbs.

6011-008

6011-008View

6011-06
6011-06

6011-06View
6011-09

Positive slam action bolts. All steel case. Reversible steel bolts with 45º and 60º taper. Ductile iron bolt furnished with double taper. Holes for 1/4″ screws. Offset bolts are 1/2″ offset. All parts are zinc plated.
Item # 6011-050, 45º Taper Bolt – Flush
Item # 6011-051, 45º Taper Bolt – Offset
Item # 6011-052, 60º Taper Bolt – Flush
Item # 6011-053, 60º Taper Bolt – Offset
Item # 6011-054, Double Taper Bolt – Flush
Item # 6011-055, Double Taper Bolt – Offset

6011-050
6011-050

6011-050View
6011-050

6011-050-1
6011-050

6011-51
6011-51

6011-052
6011-052

6011-052View
6011-052

6011-053
6011-053

6011-053View
6011-053

6011-054
6011-054

6011-054View
6011-054

6011-055
6011-055

6011-055View
6011-055
Item # 6011-103, Rod Guide with Anti-Rattle Spring
Steel rod guide for use with 6011 and 6013 dead bolt locks. Provided with spring to prevent rattle.
Finish – Zinc plated

6011-103

6011-103View

Item # 6011-DB, Center Lock Mechanism for Use with Rods or Cable 2 Point Centercase Deadbolt Action
Item # 6011-DB-S, Center Lock Mechanism for Use with Rods or Cable 2 Point Centercase Deadbolt with Safety Feature
Item # 6013-C, Center Lock Mechanism for Use with Rods or Cable 3 Point Cenercase Deadbolt Action
Item # 6013-CS, Center Lock Mechanism for Use with Rods or Cable 3 Point Cenercase Deadbolt with Safety Feature
Center Lock Mechanism for Use with Rods or Cable. Available with Safety Release Features.
These centercase mechanisms are for use with 5/16″ square shank handles. They can be used with rods or cable operated endbolts.

6011-D
6011-D

6011-DB-S
6011-DB-S

6013-C
6013-C

6013-CS
6013-CS

Item # 0056-001, Western Gate Locks
All steel gate lock for stake side gates or industrial use. Lock is universal, right or left hand. Available for side or corner mounting. Can also be purchased with a universal padlock feature. Lock is made of 8 ga. steel with 0.406 mounting holes, handle is 1/2″ dia. steel.
Finish – Zinc plated
Weight – 1.5 lbs.
Note: Available with padlocking feature

0056
0056

Item # 1057-AS, Aluminum Lock Less Pipe
Lock allows entire length of the pipe to cam over to secure door. Supplied with hinge type pipe holders. Handle has black vinyl grip and is riveted, not bolted to lug for added security.
Bracket assemblies supplied with non removable pin for maximum security. Also available with removable pin on hinge type pipe holder.
Normally supplied less pipe but, can be purchased pre-welded in 36″ and 48″ lengths, ex. 1057-36-A, 1057-48-A.
Finish -Mill finish Aluminum
Lock can be special ordered as a weldment in various lengths.

0558-001

Item # 0558-001, Anti-Rack Lock Kit Left Hand
This lock can be supplied as a complete weldment using 1″ schedule 40 pipe or it can be supplied as a kit of parts less pipe for welding in the field. Normally supplied with a hot dip galvanized finish. Cams and keepers are of forged steel, supplied with two anti-rack rings, two large bearing brackets with nylon bearings and one center bracket with nylon bearings.
If a weldment including pipe is desired, with exact specifications for size and location of parts.

0558-002

Item # 0558-002, Anti-Rack Lock Kit Right Hand
This lock can be supplied as a complete weldment using 1″ schedule 40 pipe or it can be supplied as a kit of parts less pipe for welding in the field. Normally supplied with a hot dip galvanized finish. Cams and keepers are of forged steel, supplied with two anti-rack rings, two large bearing brackets with nylon bearings and one center bracket with nylon bearings.
If a weldment including pipe is desired, with exact specifications for size and location of parts.

0658-001

Item # 0658-001, Anti-Rack Lock Kit
This lock can be supplied as a complete weldment using 1″ schedule 40 pipe or it can be supplied as a kit of parts for welding in the field. Supplied with two large brackets with nylon bearing, one center bracket with nylon bearings, two keepers, two cams, one handle, and one hasp. The top and bottom cams may be reversed so that the lock is either right or left hand.
Finish – Stainless Steel – Polished, Steel – Galvanized.
Weight – 5 lbs.

0658-SSP

Item # 0658-SSP, Anti-Rack Lock Kit
This lock can be supplied as a complete weldment using 1″ schedule 40 pipe or it can be supplied as a kit of parts for welding in the field. Supplied with two large brackets with nylon bearing, one center bracket with nylon bearings, two keepers, two cams, one handle, and one hasp. The top and bottom cams may be reversed so that the lock is either right or left hand.
Finish – Stainless Steel – Polished, Steel – Galvanized.
Weight – 5 lbs.

6011-210

Item # 6011-210, 3/8″ Steel Rods for use with 6011 Rod Locks
3/8″ dia. steel round rod. For use with rod locks. Available bent for flush endbolts & rod guides and straight for offset endbolts.
36″ rods Weight – 1.25 lbs.
48″ rods Weight – 1.50 lbs.
Finish – Zinc plated.

6011-223

Item # 6011-223, 3/8″ Steel Rods for use with 6011 Rod Locks
3/8″ dia. steel round rod. For use with rod locks. Available bent for flush endbolts & rod guides and straight for offset endbolts.
36″ rods Weight – 1.25 lbs.
48″ rods Weight – 1.50 lbs.
Finish – Zinc plated.

6011-211

Item # 6011-211, 3/8″ Steel Rods for use with 6011 Rod Locks
3/8″ dia. steel round rod. For use with rod locks. Available bent for flush endbolts & rod guides and straight for offset endbolts.
36″ rods Weight – 1.25 lbs.
48″ rods Weight – 1.50 lbs.
Finish – Zinc plated.

6011-224

Item # 6011-224, 3/8″ Steel Rods for use with 6011 Rod Locks
3/8″ dia. steel round rod. For use with rod locks. Available bent for flush endbolts & rod guides and straight for offset endbolts.
36″ rods Weight – 1.25 lbs.
48″ rods Weight – 1.50 lbs.
Finish – Zinc plated.

6011-230

Item # 6011-230, 3/8″ Steel Rods for use with 6011 Rod Locks
3/8″ dia. steel round rod. For use with rod locks. Available bent for flush endbolts & rod guides and straight for offset endbolts.
36″ rods Weight – 1.25 lbs.
48″ rods Weight – 1.50 lbs.
Finish – Zinc plated.

6011-233

Item # 6011-233, 3/8″ Steel Rods for use with 6011 Rod Locks
3/8″ dia. steel round rod. For use with rod locks. Available bent for flush endbolts & rod guides and straight for offset endbolts.
36″ rods Weight – 1.25 lbs.
48″ rods Weight – 1.50 lbs.
Finish – Zinc plated.

2011-231

Item # 6011-231, 3/8″ Steel Rods for use with 6011 Rod Locks
3/8″ dia. steel round rod. For use with rod locks. Available bent for flush endbolts & rod guides and straight for offset endbolts.
36″ rods Weight – 1.25 lbs.
48″ rods Weight – 1.50 lbs.
Finish – Zinc plated.

6011-234

Item # 6011-234, 3/8″ Steel Rods for use with 6011 Rod Locks
3/8″ dia. steel round rod. For use with rod locks. Available bent for flush endbolts & rod guides and straight for offset endbolts.
36″ rods Weight – 1.25 lbs.
48″ rods Weight – 1.50 lbs.
Finish – Zinc plated.

6011-234-1

For more information:
Call 314-436 0432
Fax 314 436 0481
Email: hardwaremfg@aol.com

Browse our inventory of industrial hardware

Hardware MFG
1415 S. 18th
Saint Louis, MO 63104
HardwareMFG@aol.com
Phone: (314) 436-0432
Fax: (314) 436-0481

Conversion Optimized Website Design by Engios Digital

Copyright 2018 HardwareMFG. All rights reserved