T-Strap Hinges and Truckbody

T-Strap Hinges and Truckbody

Embossed Steel Hinges- 8 gauge strap hinge available zinc plated or stainless steel. 1/2″ pin, mounting holes for 5/16″ bolts,
#2008, 8″ long strap
#2012, 12″ long strap
#2016, 16″ long strap
Embossed Over The Seal Steel Hinges- 8 gauge strap hinge available zinc plated or stainless steel. 1/2″ pin, mounting holes for 5/16″ bolts. Can bridge the door molding or door seal.
#2108, 8″ long strap
#2112, 12″ long strap
#2116, 16″ long strap
Narrow Bracket Over The Seal Steel Hinges- 8 gauge strap hinge available zinc plated or stainless steel, .160 aluminum & 10 gauge stainless steel. 1/2″ pin. Can bridge the door molding or door seal.
#2508, 8″ long strap
#2512, 12″ long strap
#2516, 16″ long strap
3200 Series Narrow Bracket Reverse Over The Seal Hinges- 8 gauge strap hinge available zinc plated or stainless steel. Embossed strap. 1/2″ pin. Can bridge the door molding or door seal. Reverse bracket allows 270 degree swing
#3208, 8″ long strap
#3212, 12″ long strap
#3216, 16″ long strap
3400 Series Narrow Bracket Side & Rear Door Hinges – 8 gauge strap hinge with 180 degree swing. Available zinc plated or stainless steel. Embossed strap. 1/2″ pin. Can bridge the door molding or door seal.
#3408, 8″ long strap
#3412, 12″ long strap
#3416, 16″ long strap
3500 Series Narrow Bracket Over The Seal Steel Hinges- 8 gauge strap hinge available zinc plated or stainless steel. Embossed strap. 1/2″ pin. Can bridge the door molding or door seal.
#3508, 8″ long strap
#3512, 12″ long strap
#3516, 16″ long strap
All Steel Truck & Trailer Hinges-
Bracket 5/16″ x 1-14″
Strap 5/16″ x 4″ x 9″ with 1/2″ diameter steel bolt and lock nut
#1806-000-B –0 Holes
#1806-003-B –3 Holes
#1806-004-B –4 Holes
Square Corner Hinge- 8 gauge strap hinge with 270 degree swing. Zinc plated steel. 1/2″ pin. Universal for right and left hand doors. 1/2″ offset available.
#4040
Bracket 5″ x 4-1/2″ Wide
Strap 1-3/4 x 12-1/8″ Long
Heavy Duty Laminated Steel Hinge- Hinge with 270 degree swing. Plain steel. 1/2″ pin.
#926-004
Bracket 1/4″ x 5-1/2″ x 3″, with 21/64″ holes
Strap 1/2″ (2 lamination of 1/4″ steel) x 2-7/8″ x 4″
Ramp Door Hinge Plain finish, steel weld-on hinge with grease fitting. 8-3/16″ overall length, 1/4″ leaf with 1/4″ offset, brackets 1.05 O.D. 2″ long bushings.
#1902-1/4

Manufactured from high quality steel. Embossed for greater strength. For use on trailers and truck bodies. Has wide bracket with three mounting holes. Three strap lengths available. Hinges supplied with non-removable pin for maximum security. Also available with removable pins. To order removable pins add the letter R to the catalog number. Example: 2008-R.
Bracket – 8 Ga. x 4-1/2″ x 3″ from center of pin
Strap – 8 Ga. x 2″ x 8″, 12″ or 16″
Pin – 1/2″ Dia. steel
1/8″ Shim available.

Also available in 0.160 aluminum & 10 ga. plain or polished stainless steel.

Item # 2008, 2008-SS, 2008-AS Embossed Steel Hinges
Flush – Strap 8” long
Mounting holes for 5/16” bolts
Finish – Steel – Zinc plated
Stainless – Plain or polished
Weight – 2 lbs.
Item # 2012, 2012-SS, 2012-AS Embossed Steel Hinges
Flush – Strap 12” long
Mounting holes for 5/16” bolts
Finish – Steel – Zinc plated
Stainless – Plain or polished
Weight – 2-1/4 lbs.
Item # 2016, 2016-SS, 2016-AS Embossed Steel Hinges
Flush – Strap 16” long
Mounting holes for 5/16” bolts
Finish – Steel – Zinc plated
Stainless – Plain or polished
Weight – 2-1/2 lbs.
Item # 2000, 2000-SS, 2016-AS Embossed Steel Hinges
For use with 2000 series hinges with wide bracket when 1/8” offset is required.
Finish –Zinc plated

2008
2008

2008View
2008

2012
2012

2012View
2012

2016
2016

2016View
2016

2000
2000

Designed to bridge door molding or door seal. Manufactured from high quality steel. Embossed for greater strength. Three strap lengths available. All hinges supplied with non-removable pin for maximum security. Also available with removable pins. To order removable pins add the letter R to the catalog number Example: 2108-R.
Bracket – 8 Ga. x 4 1/2″ x 3″ from center of pin
Strap – 8 Ga. x 2″ x 8″, 12″ or 16″
Pin – 1/2 Dia. steel
1/8″ Shim available
All mounting holes for 5/16″ bolts.

Also available in 0.160 aluminum & 10 ga. plain and polished stainless steel.

Item # 2108, 2108-SS, 2108-AS Steel Embossed Over The Seal Hinges
Flush – Strap 8” long
Finish – Steel – Zinc plated
Stainless – Plain or polished
Weight – 2 lbs.
Item # 2112, 2112-SS, 2112-AS Steel Embossed Over The Seal Hinges
Flush – Strap 12” long
Finish – Steel – Zinc plated
Stainless – Plain or polished
Weight – 2-1/4 lbs.
Item # 2116, 2116-SS, 2116-AS Steel Embossed Over The Seal Hinges
Flush – Strap 16” long
Finish – Steel – Zinc plated
Stainless – Plain or polished
Weight – 2-1/2 lbs.

2108
2108

2108View
2108

2112
2112

2112 View
2112

2116
2116

2116View2116

Reverse bracket allows door to swing 270 degrees. Manufactured from high quality steel, embossed for greater strength. All hinges supplied with non-removable pin. Also available with removable pins. To order removable pins add the letter R to the catalog number. Example: 2208-R.
Bracket – 8 Ga. x 4 1/2″ x 1 5/8″ from center of pin
Strap – 8 Ga. x 2″ x 8″, 12″ or 16″.
Pin – 1/2 Dia. steel
Finish – Steel – Zinc Plated.

Also available in 0.160 aluminum & 10 ga. plain and polished stainless steel.

Item # 2208, 2208-SS, 2208-AS Steel Square Corner Hinge with Reverse Brackets
Item # 2212, 2212-SS, 2212-AS Steel Square Corner Hinge with Reverse Brackets

Item # 2216, 2216-SS, 2216-AS Steel Square Corner Hinge with Reverse Brackets

2208
2208

2208View
2208

2212
2212

2212View
2212

2216
2216

2216View
2216

Item # 2001, 2001-SS 1/8″ Shim
For use with all 2000 series hinges with a narrow bracket when 1/8” offset is required.
Finish – Zinc plated.

2001
2001

Manufactured from high quality steel. Strap is embossed for greater strength. Basic hinge as 2000 Series but features a narrow bracket for mounting where space is limited.
Bracket – 8 Ga. x 4 1/2″ x 1 5/8″ from center of pin
Strap – 8 Ga. x 2″ x 8″, 12″ or 16″.
Pin – 1/2 Dia. steel
Finish – Steel – Zinc Plated.

Also available in 0.160 aluminum & 10 Ga. plain and polished stainless steel

Item # 2408, 2408-SS, 2408-AS Steel Narrow Bracket Side & Rear Door Hinges
Item # 2412, 2412-SS, 2412-AS Steel Narrow Bracket Side & Rear Door Hinges
Item # 2416, 2416-SS, 2416-AS Steel Narrow Bracket Side & Rear Door Hinges

2408
2408

2408View
2408

2412
2412

2412View
2412

2416
2416

2416View
2416

Designed to bridge door molding or door seal. Manufactured from high quality steel. Strap is embossed for greater strength. Features a narrow bracket for mounting where space is limited. Supplied with non-removable pin for maximum security. Also available with removable pin. To order removable pin add the letter R to the catalog number. Example: 2508-R.
Bracket – 8 Ga. x 4 1/2″ x 1 5/8″ from center of pin

Strap – 8 Ga. x 2″ x 8″, 12″ or 16″.
Pin – 1/2 Dia. steel
Finish – Steel – Zinc Plated.

Also available in 0.160 aluminum & 10 Ga. plain and polished stainless steel.

 

Item # 2508, 2508-SS, 2508-AS Steel Narrow Bracket Over The Seal Hinges
Item # 2512, 2512-SS, 2512-AS Steel Narrow Bracket Over The Seal Hinges
Item # 2516, 2516-SS, 2516-AS Steel Narrow Bracket Over The Seal Hinges

2508
2508

2508View
2508

2512
2512

2512View
2512

2516
2516

2516View
2516

Design to bridge door molding or door seal. Reverse bracket enables 270 degree swing. Manufactured from high quality steel. Strap is embossed for greater strength. Single layer bracket is seam welded for maximum strength. Supplied with non-removable pin for maximum security.
Bracket – 8 Ga. x 4 1/2″ x 1 5/8″ from center of pin
Strap – 8 Ga. x 2″ x 8″, 12″ or 16″.
Pin – 1/2 Dia. steel
Finish – Steel – Zinc Plated.


Item # 3208, 3208-SS, 3208-AS Series 3200 Steel Narrow Bracket Reverse Over The Seal Economy Hinges
Item # 3212, 3212-SS, 3212-AS Series 3200 Steel Narrow Bracket Reverse Over The Seal Economy Hinges
Item # 3216, 3216-SS, 3216-AS Series 3200 Steel Narrow Bracket Reverse Over The Seal Economy Hinges

Economy hinge for mounting with 180 degree swing. Manufactured from high quality steel. Strap is embossed for greater strength. Single layer bracket and leaf are seam welded for maximum strength. Supplied with non-removable pin for maximum security.
Bracket – 8 Ga. x 4 1/2″ x 1 5/8″ from center of pin
Strap – 8 Ga. x 2″ x 8″, 12″ or 16″.
Pin – 1/2 Dia. steel
Finish – Steel – Zinc Plated.

3208
3208

3208View
3208

3212
3212

3212View
3212

3216
3216

3216View
3216

Item # 3408, 3408-SS, 3408-AS Series 3400 Steel Narrow Bracket Side & Rear Door Hinge Economy Hinges
Item # 3408, 3408-SS, 3408-AS Series 3400 Steel Narrow Bracket Side & Rear Door Hinge Economy Hinges
Item # 3408, 3408-SS, 3408-AS Series 3400 Steel Narrow Bracket Side & Rear Door Hinge Economy Hinges

3408
3408

3408View
3408

3412
3412

3412View
3412

3416
3416

3416View
3416

Design to bridge door molding or door seal. Manufactured from high quality steel. Strap is embossed for greater strength. Single layer bracket and leaf are seam welded for maximum strength. Supplied with non-removable pin for maximum security.
Bracket – 8 Ga. x 4 1/2″ x 1 5/8″ from center of pin
Strap – 8 Ga. x 2″ x 8″, 12″ or 16″.
Pin – 1/2 Dia. steel
Finish – Steel – Zinc Plated.

Item # 3508, 3508-SS, 3508-AS Series 3500 Steel Narrow Bracket Over The Seal Economy Hinges
Item # 3512, 3512-SS, 3512-AS Series 3500 Steel Narrow Bracket Over The Seal Economy Hinges
Item # 3516, 3516-SS, 3516-AS Series 3500 Steel Narrow Bracket Over The Seal Economy Hinges

3508
3508

3508View
3508

3512
3512

3512View
3512

3516
3516

3516View
3516

All steel hinges have double or triple laminations in the strap for greater strength. Opens 180 degrees. Supplied with non-removable pin for maximum security. (Also available with removable pin). Available flush or 3/16″ offset. Available in 10 Ga. stainless steel.
Bracket – 8 Ga. x 5″ x 3″ from center of pin
Strap – 8 Ga. x 2 1/4″ x 8″, 12″ or 16″ and 19″ long.
Pin – 1/2 Dia. steel
Finish – Zinc plated.

Item # 308, 308-SS Laminated Steel Hinges
Item # 312, 312-SS Laminated Steel Hinges
Item # 316, 316-SS Laminated Steel Hinges
Item # 319, 319-SS Laminated Steel Hinges

308
308

308View
308

312
312

312View
312

316
316

316View
316

319
319

319View
319

All steel hinges have double or triple laminations for greater strength. Allows for 270 degree opening. Supplied with non-removable pin for maximum security. (Removable pin also available). Available in 10 ga stainless steel.
Bracket – 8 Ga. x 5″ x 5″ from center of pin
Strap – 8 Ga. x 2 1/4″ x 8″, 12″ or 16″ and 19″.
Pin – 1/2 Dia. steel
Finish – Zinc plated.

Item # 708, 708-SS Laminated Steel Square Corner Hinges
Item # 712, 712-SS Laminated Steel Square Corner Hinges
Item # 716, 716-SS Laminated Steel Square Corner Hinges
Item # 719, 719-SS Laminated Steel Square Corner Hinges

708

708

708View
708

712
712

712View716
712

716
716

716View
716

719
719

719View
719

All steel hinges allow full 270 º opening to enable door to swing parallel with side of body. Supplied with non-removable pin for maximum security. (Removable pin also available). Universal for right or left hand doors.

Bracket Size 8 ga. x 2 1/8″, 5 in wide
Strap Size 8 ga x 1 3/4″, 12 in long
Pin Diameter 1/2 in
Finish Zinc plated
Item # 4022, 4022-SS-001 Strap 12″ Long
Strap – 12″ long
Mounting holes for 1/4″ screws
Available from flush or 1/4″ offset
Specify offset required

Item # 4026, 4026-SS-001 Steel Strap 16″ Long

Item # 4029, 4029-SS-001 Strap 19″ Long

Item # 4040, Square Corner Hinges
Square corner rear door hinge. All steel, this hinge allows door to swing 270º for full opening. Supplied with non-removable pin. (Removable pin also available). Universal for right or left hand doors. Available Flush to 1/2″ Offset.
Bracket – 8 ga x 5″ x 4-1/2″ Wide
Strap – 8 ga x 1-3/4″ x 12-1/8″ Long
Pin – 1/2″ Dia.Finish – Zinc plated
Weight – 3-3/4 lbs.

4022
4022

4022View
4022

4026
4026

4026View
4026

4029
4029

4029View
4029

4040
4040

4040View
4040

For trailer and container doors fabricated with a heavy steel bushing as a pivet point for demanding applications. Available with or without mounting holes.

Bracket – 5/16″ x 1 1/4″ x 4 17/64″
Strap Size – 5/16″ x 4″ x 9″ to center of pin
Pin – 1/2″ Diameter x 5 1/4″ headed pin with cotter 1/2-20 x 5 1/4″ bolt
Finish – Zinc plated
Weight – 5 lbs

Item # 1809-000-B, 0 Hole
Item # 1809-003-B, 3 Hole
Item # 1809-004-B, 4 Hole

1806

All steel construction fabricated of 1/4″ thick steel rolled to form a pivot point. Use the same heavy 5/16″ thick steel bracket from the 1809 hinge.
Available in 3.4 and no hole models with 1/2″ steel boll and lock nut.

Item # 1806-000-B, 0 Hole
Item # 1806-003-B, 3 Hole
Item # 1806-004-B, 4 Hole

1806-1

1809View

Item # 1716, Radius Corner Hinges

Hinge with 1 3/4″ radius for rounded corner applications has 3 laminations of 8 ga. steel for added strength. Has 270 degree swing. Can be supplied with a 7/16″ over the seal bend.
Bracket – Powder coated ductile iron

Strap – Zinc plated 8 ga. 1-1/2″ x 16″
Pin – 1/2″ Dia.x 2-7/8″
Weight – 4 lbs.

1716
1716

1716View
1716

Item # 2322, Radius Corner Hinges
This 1″ radius corner hinge has embossed steel strap and Malleable iron bracket. Has 270 degree swing to allow full opening of rear door.
Bracket – Malleable iron
Strap Size – 8 ga. Steel x 2″ x 11 7/8
Finish – Zinc plated
Material – Steel
Weight – 2 1/2 lbs

2322
2322

2322View
2322

Item # 7014, Series 7014 Square Corner Hinge
Designed for square corner applications. Has a steel laminated strap for added strength. Swings 270 degrees to enable door to be opened completely.
Bracket – Powder coated ductile iron 3″ wide x 5-1/4″ high
Strap – Zinc nlated 8 Pa. x 1-1/2″ x 25-1/4″ long.
Pin – 1/2″ Dia. x 2-7/8″ long.
Weight – 5 lbs.

7014
7014

7014View
7014

Item # 926, Hinge with 16″ Strap
Features narrow bracket to allow mounting without modification. Full 270º swing to allow door to open to side of body. Made from 1/4″ steel for heavy duty applications.
Bracket – 1/4″ x 5-1/2″ x 3″
Strap – 1/4″ x 2-7/8″ x 16″
Finish – Zinc Plated or grey powder coated
Weight – 7-1/4 lbs.

926
926

926View
926

Item # 920, Hinge with 20″ Strap
Heavy duty laminated hinge with no holes for weld on applications. Has double laminations of 1/ 4″ steel for extra strength.
Bracket – 1/4″ x 5-1/2″ x 5″
Strap – 1/4″ x 2-7/8″ x 20″
Finish – Plain
Weight – 9 lbs.

920
920

920View
920

Item # 926-006, Heavy Duty Laminated Hinges
All steel hinge features narrow bracket. Short strap has double lamination. 270º rotation.
Bracket – 1/4″ x 5-1/2″ x 3″ with 21/64″ holes
Strap – 1/2″ (2 laminations of 1/4″ steel) x 2-7/8″ x 6″
Pin – 1/2″ dia. steel
Finish – Plain
Weight – 4.5 lbs.

926-006
926-006

926-006View
926-006

Features narrow bracket for mounting where space is limited. Supplied with 1/2″ drive pin. (Removable pin also available).
Strap – 2 laminations of 8 ga. Steel. x 1-1/2″ x 8″ or 12″
Pin – 1/2″ dia. x 2-7/8″ steel
Furnished flush to 1/2″ offset. (Specify offset required)
Finish – Powder coated bracket and zinc plated leaf.

Item # 118, Hinge with 8″ Strap
Item # 118-012, Hinge with 12″ Strap

318
118

118View
118

118-012
118-012

118-012View
118-012

Item # 118-001, Hinge with 12″ Steel Strap

Narrow bracket for mounting where space is limited.
This hinge is designed with bend to accommodate Vinyl or Aluminum extrusion.
Bracket – Ductile Iron
Steel – strap 1-1/2″ wide x 12″ long
2 laminations of 8 ga. Steel
1/2″ Steel pin
Finish – Powder coated bracket and zinc plated leaf.
Weight – 2 1/2 lbs.

118-001
118-001

118-001View
118-001

Item # 1005, Aluminum Butt Hinge
Material 3/16″ Aluminum with 1/2″ Dia. Removable Steel Pin and thrust washers. Can be welded on or end user can drill holes for mounting.
Dimensions – 0.190 x 4 3/4″ x 5″
Finish – Mill finish
Weight – 1 1/8 lbs.

1105
1005

1005View
1005

Item # 1902-1/4, Ramp Door Hinge
Steel hinge for ramps or heavy access doors. Plain finish for easier welding. Supplied with a grease fitting for long life & smooth operation. Brackets are 1.05 O. D. bushings 2″ long, leaf is 1/4″ offset and made of 1/4″ steel.
Finish – Plain steel
Weight. 2.5 lbs

1902-
1902-1/4

Item # 101, Economy Die-Cast Hinge
Economy die cast hinge for use on utility and service vehicles. Can also be used on access doors for recreational and emergency vehicles. Supplied with a solid stainless steel pin for strong rustfree service. Holes drilled and countersunk for No. 10 screws.
Finish – Chrome plated
Weight – 0.3 lbs.

101
101

101-View
101

Item # 104, Zinc Die-Cast Flush Hinge
Zinc die cast flush hinge. Chrome plated hinge revolves on nylon bushings for smooth operation. For use on cabinets, service vehicles and utility trucks. Has reinforced ribbing on back for added strength. Features a solid stainless steel pin. Holes drilled and countersunk for No. 10 screws.
Finish – Chrome plated Weight – 0.7 lbs.

104
104

104View
104